 |
|
|
|
||||||
 |
|||||||||
|
|||||||||
|
|
||||||||||||||||||||||||
|
|
|
OBS - Most of panels are modified for equipment (switches etc) I have avalible. Click on the link to view or rightclick to download. If not otherwise stated the width of the panels are ->>146.05 mm<<--, Free to use for all non-business, non-profitable use. All other use must be with my written agreement. Note that these are my version of panels, they diff to “some” degree from the originals. Notice also that Lightpanels here are same as baseplate (not true in real life) where they are slighly less (aprox 1,20mm) Checkout http://www. viperpits.org for huge amount of usefull info |
|
|
|
Each individual panel quadrant consist of minumum three layers. Baseplate - Bottom part. Planned to use 1,5 mm Aluminium Lightpanel - planned 5 mm thick Acryl or PVC (depending on backlighting of panel utilized or not) Overlay - Printout on transparent film and placed on top of lightpanel (I think you get the picture) Not shown here are the basic sizes for planned PBC, Holes in Baseplates and Lightpanels are prepared |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
